Product Summary
The SN65ALS180 and SN75ALS180 differential driver and receiver pairs are integrated circuits designed for bidirectional data communication on multipoint bus-transmission lines. They are designed for balanced transmission lines and meet TIA/EIA-422-B, TIA/EIA-485-A, and ITU Recommendation V.11.
They combine a 3-state differential line driver and a differential input line receiver, both of which operate from a single 5-V power supply. The driver and receiver have active-high and active-low enables, respectively, that can be connected together externally to function as a direction control.The driver differential outputs and the receiver differential inputs are connected to separate terminals for greater flexibility and are designed to offer minimum loading to the bus when the driver is disabled or VCC = 0.These ports feature wide positive and negative common-mode voltage ranges, making the device suitable for party-line applications.
Parametrics
Absolute maximum ratings over operating free-air temperature range (unless otherwise noted):
(1)Supply voltage, VCC (see Note 1):7 V;
(2)Voltage range at any bus terminal:-10 V to 15 V;
(3)Enable input voltage, VI:5.5 V;
(4)Package thermal impedance, θJA (see Notes 2 and 3): D package:86°C/W;N package:80℃/W;
(5)Operating virtual junction temperature, TJ:150℃;
(6)Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds:260℃;
(7)Storage temperature range, Tst:-65℃ to 150℃
Features
(1)Meet or Exceed the Requirements of TIA/EIA-422-B, TIA/EIA-485-A and ITU Recommendation V.11;
(2)High-Speed Advanced Low-Power Schottky Circuitry;
(3)Designed for 25-Mbaud Operation in Both Serial and Parallel Applications;
(4)Low Skew Between Devices:6 ns Max;
(5)Low Supply-Current Requirements:30 mA Max;
(6)Individual Driver and Receiver I/O Pins With Dual VCC and Dual GND;
(7)Wide Positive and Negative Input/Output Bus Voltage Ranges;
(8)Driver Output Capacity:±60 mA;
(9)Thermal Shutdown Protection;
(10)Driver Positive- and Negative-Current Limiting;
(11)Receiver Input Impedance:12Ω k Min;
(12)Receiver Input Sensitivity :±200 mV Max;
(13)Receiver Input Hysteresis:60 mV Typ;
(14)Operate From a Single 5-V Supply;
(15)Glitch-Free Power-Up and Power-Down Protection
Diagrams
<IMG border=0 src="http://www.seekic.com/uploadfile/ic-mfg/20127303456212.jpg">
Image | Part No | Mfg | Description | Pricing (USD) |
Quantity | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
SN75ALS180D |
Texas Instruments |
Buffers & Line Drivers Diff and Rec Pair |
Data Sheet |
|
|
|||||||||||||
SN75ALS180DE4 |
Texas Instruments |
Bus Transceivers Diff Driver And Receiver Pair |
Data Sheet |
|
|
|||||||||||||
SN75ALS180DG4 |
Texas Instruments |
RS-485 Interface IC Differential Driver And Receiver Pair |
Data Sheet |
|
|
|||||||||||||
SN75ALS180DRG4 |
Texas Instruments |
RS-485 Interface IC Differential Driver And Receiver Pair |
Data Sheet |
|
|
|||||||||||||
SN75ALS180DR |
Texas Instruments |
Buffers & Line Drivers Diff Driver And Receiver Pair |
Data Sheet |
|
|
|||||||||||||
SN75ALS180DRE4 |
Texas Instruments |
Bus Transceivers Diff Driver And Receiver Pair |
Data Sheet |
|
|